民用飞机静气动弹性载荷计算方法研究

以某大型客机为例,根据气动外形利用有限元软件PANTRAN建立高阶气动面元,利用ZONAIR静气动弹性方法,分析了其弹性载荷,包含气动力系数、过载、迎角,并与刚性载荷进行了对比。此方法合理可靠,可用于民用飞机的弹性载荷设计分析。     

综合时序信息的试验优化设计及稀疏求解

考虑不同试验点的试验成本及试验时序信息,在性能指标与影响因素间的响应模型未知情况下,利用装备系统的先验信息构造模型驱动的基函数,构造相应的回归模型来刻画系统的内在关系,分析不同试验点成本及试验时序对试验方案的影响。定义了一种考虑空间权重及批序贯时序的非均匀最优设计模型,将稀疏理论引入到回归试验设计中,把不同批次试验下的回归试验设计模型参数估计问题转换为结构化稀疏重构问题,讨论了非均匀最优设计的构造定理,提出结构化稀疏参数求解算法。算例表明:利用本方法生成的试验点考虑了试验点空间权重和试验时序信息,更符合实际试验规程;采用本方法获得的响应函数得到的期望预测误差更小。     

旋转变压器误差补偿技术及应用

分析了多极旋转变压器的误差特性,介绍了误差补偿原理及方法,并通过 试验,验证了误差补偿方法的正确性及可行性。本方法适用于惯导系统及转台的角度转 换,可有效提高转换精度。     

某航天器输氢管道系统结构完整性评估

为保障某航天器在服役年限内不发生事故，针对航天器上采用插入焊接技术的精密管道系统进行结构完整性评估。在考虑到系统存在整圈的环形未焊透缺陷基础上，结合工程实践，假设在焊接区域存在更危险的平面缺陷。首先，开展高压气相热充氢试验下的标准拉伸和三点弯试验得到管道系统材料"J-75"在临氢环境下应力应变曲线和断裂韧性。其次，采用有限元程序计算系统在内压、惯性载荷与离面位移作用下的应力分布，考虑到间隙配合中的不确定性，改变模型中的最大间隙多次模拟计算，发现最大应力位置基本不变，以此区域作为假想缺陷的具体萌生区域。最后，采用失效评估图（FAD）方法对存在4种缺陷模式的系统分别进行结构完整性评估。通过引入安全裕度的概念，发现系统在含有初始尺寸（0.15 mm）的4种平面缺陷时，均处于安全状态，并且安全裕度都在2倍以上；通过工程临界分析（ECA）发现随着缺陷尺寸的增大，系统中含有缺陷2（位于管道焊接区域最大应力处的轴对称平面且沿焊深方向扩展的缺陷）时最为危险，且当缺陷深度超过0.61 mm时将断裂失效；考虑到测试数据的弥散性，针对系统最危险的模式，以安全裕度为可靠性指标，将失效评估图方法与可靠性评价相结合，得到系统在含有尺寸为0.15 mm的缺陷2情况下保有足够安全裕度的可靠性下限值超过0.999 5。     

热障涂层在涡轮叶片应用中的热防护有效性

建立了含热障涂层的涡轮叶片简化传热模型,通过理论推导建立了热障涂层的有效性判据,并基于此进行了热防护有效性分析。理论分析与数值实验表明:由热障涂层带来的复合传热表面传热系数的变化会显著影响热障涂层的热防护效果；在发动机典型工况下,对于处于高温区的高压涡轮叶片前缘处,热障涂层引起的复合传热表面传热系数变化率最大值的范围为1.25%~10.83%以满足热防护有效性要求。在工程中应特别注意由于热障涂层的应用带来的复合传热表面传热系数的变化,否则会导致热防护失效,甚至产生反效果。      

Wrinkling analysis for small solar-photon sails: An experimental and analytic approach for trajectory design

A good model of solar-radiation pressure induced thrust is one of the key points in sailcraft trajectory design. The sail membrane’s local topographic deformations, i.e. wrinkles and creases, are among the main aspects that such a model should include. We have analyzed the influence of wrinkles/creases, as a whole, by measuring the related deformations on small samples of sail membrane, 2.5?μm thick, consisting of CP1 and physical-vapor-deposition Aluminum. Experimental outcomes from our laboratory facility have been processed, statistically investigated, and inserted into the lightness vector formalism. We have used such formalism for accurate sailcraft trajectory computation via a non-ideal reflection sail thrust model. Finally, we computed the deviations of wrinkled-sail sailcraft final orbital states with respect to the no-wrinkle sail final orbital ones for a circular to circular 2D inward transfer. The radii of the orbits are 1?AU and the semi-major axis of Mercury, respectively. It appears that sail wrinkles and creases are no longer negligible in the sailcraft trajectory design.     

Multiscale eigenelement method for periodical composites: A review

Based on the eigenvector expansion idea, the Multiscale Eigenelement Method (MEM) was proposed by the author and co-workers. MEM satisfies two equivalent conditions, one condition is the equivalence of strain energy, and the other is the deformation similarity. These two equivalent conditions character the structure-preserving property of a multiscale analysis method. The equivalence of strain energy is necessary for achieving accurate macro behaviors such as lower order frequencies, while the deformation similarity is essential for predicting accurate micro behaviors such as stresses. The MEM has become a powerful multiscale method for the analysis of composite structures because of its high accuracy and efficiency. In this paper, the research advances of MEM are reviewed and all types of eigenelement methods are compared, focusing on superiorities and deficiencies from practical viewpoint. It is concluded that the eigenelement methods with smooth shape functions are more suitable for the analysis of macro behaviors such as lower order frequencies, and the eigenelement methods with piecewise shape functions are suitable for the analysis of both macro and micro behaviors.     

Behavior and functional modeling methods of doubly salient electromagnetic generators for aircraft electrical power system applications

The Doubly Salient Electromagnetic Generator(DSEG) is a promising candidate in aircraft generator application due to the simplicity, robustness and reliability. However, the field windings and the armature windings are strongly coupled, which makes the inductance characteristics non-linear and too complex to model. The complex model with low precision also leads to difficulties in modeling and analysis of the entire aircraft Electrical Power System(EPS). A behavior level modeling method based on modified inductance Support Vector Machine(SVM) is proposed. The Finite Element Analysis(FEA) inductance data are modified based on the experiment results to improve the precision. A functional level modeling method based on input–output characteristics SVM is also proposed. The two modeling methods are applied to a 9 kW DSEG prototype. The steady state and transient process precision of the proposed methods are proved by comparing with the experiment results. Meanwhile, the modeling time consumption, the application time consumption and the calculation resource demand are compared. The DSEG behavior and functional modeling methods provide precious results with high efficiency, which accelerates theoretical analysis and expands the application foreground of the DSEG in the aircraft EPS.     

A two-step weighted least-squares method for joint estimation of source and sensor locations: A general framework

It is well known that the Two-step Weighted Least-Squares(TWLS) is a widely used method for source localization and sensor position refinement. For this reason, we propose a unified framework of the TWLS method for joint estimation of multiple disjoint sources and sensor locations in this paper. Unlike some existing works, the presented method is based on more general measurement model, and therefore it can be applied to many different localization scenarios.Besides, it does not have the initialization and local convergence problem. The closed-form expression for the covariance matrix of the proposed TWLS estimator is also derived by exploiting the first-order perturbation analysis. Moreover, the estimation accuracy of the TWLS method is shown analytically to achieve the Cramér-Rao Bound(CRB) before the threshold effect takes place. The theoretical analysis is also performed in a common mathematical framework, rather than aiming at some specific signal metrics. Finally, two numerical experiments are performed to support the theoretical development in this paper.     

动态时频谱分析、探测和跟踪的随机有限集法

动态出现和消失多分量信号的时频分析问题一直是非平稳信号处理的难点之一。为此，提出了一种分析、探测和跟踪多分量信号的随机有限集法。该算法利用时频变换，如短时傅里叶变换或自适应谱估计法，以及多项式预测模型，将多分量信号的时频分析问题归纳成可利用随机有限集进行多目标追踪的问题。分析表明：借助于提出的初始权重赋值算法，以及谱分量幅度和频率的联合似然函数，就可利用高斯混合概率假设密度滤波器来实现对动态时频谱的分析、探测和跟踪。在仿真实验中，所提算法有效提升了动态时频谱的跟踪精度，其对微弱时频谱分量的探测能力，以及对载频差异的分析能力均优于文献报道的算法。